Products:
Manufacturers:
Contact:
|
Opticis DVI Extension Module
Fiber-only Detachable Module: M1-201SA-TR |
Opticis Four-Fiber Detachable DVI Extension Module (M1-201SA) US$ 625.00
The M1-201-SA is a high-quality, uncompressed data link between a host processor video card and a display peripheral. Optical technology for this transmission stretches the performance beyond the limitations of copper wire with longer length, data security, negligible RFI/EMI and the elimination of costly analog distribution systems. The four (4) optical data, Red, Green, Blue and clock can be extended up to 500 meters (1,640ft) over four (4) LC duplex multi-mode fibers (two sets) at WUXGA (1,920x1,200) at 60Hz vertical refresh.
|
|
Opticis Two-Fiber Detachable DVI Extension Module (M1-201DA) US$ 795.00
The Digital Visual Interface is a high-quality, uncompressed data link between a host processor video card and a display peripheral. DVI Optical technology for this transmission stretches the performance beyond the limitations of copper wire with longer length, data security, negligible RFI/EMI and the elimination of costly analog distribution systems. The four (4) optical data, Red, Green, Blue and clock are multiplexed and de-multiplexed through CWDM optical module. Graphic data can be extended up to 1,500 meters (4,920ft) at WUXGA resolution (1900x1200) of 60Hz vertical refresh rate over two (2) LC duplex multi-mode fibers (one set).
|
|
DVI Extension Module |
Opticis Optical DVI Extension Module (M1-2R2-TR) US$ 595.00
M1-2R2-TR is designed to enable the DDC/HDCP parameter control and power management interconnection through RJ-45C UTP copper cable with digital data gigabit over two duplex LC patch cord fibers up to 100m.
|
|
Point to Point Hybrid Cable: M1-1P0 |
|
Opticis DVI Point to Point Hybrid Cable 66ft: M1-1P0E-020 US$ 660.00
M1-1P0, is designed to adopt hybrid cables, embedded copper wires for DDC/HDCP interconnection and fibers for graphic data together in a jacket so that it offers the benefits of sturdy metallic and compact size connectors. For the simplicity of installation, it is utilized +5V DC power of graphic cards to drive both of its transmitting and receiving modules so that it doesnt require a external power adaptor. For just in case, however, its optional model to use an external power adaptor is available.
|
|
Opticis DVI Point to Point Hybrid Cable 98ft: M1-1P0E-030 US$ 858.00
M1-1P0, is designed to adopt hybrid cables, embedded copper wires for DDC/HDCP interconnection and fibers for graphic data together in a jacket so that it offers the benefits of sturdy metallic and compact size connectors. For the simplicity of installation, it is utilized +5V DC power of graphic cards to drive both of its transmitting and receiving modules so that it doesnt require a external power adaptor. For just in case, however, its optional model to use an external power adaptor is available.
|
|
|
|
|
Fiber-optic interconnection of digital graphic data, complying with DVI (Digital
Visual Interface) enables data transmission of high-quality and cost
effectiveness of integrated display systems. The DVI interface is
a industry standard of digital graphic transmission protocol, supervised
by DDWG (Digital Display Working Group), supporting TMDS (Transit
Minimized Differential Signal) graphic transmission and implementing
DDC (Display Data Control) for CPU to identify displays. It also
applies for HDCP (High Definition Contents Protection) in DTV system.
Opticis DVI products consist of a transmitter having 850nm VCSEL
array inside and a receiver having PIN-Photo Diode array inside.
They support UXGA (1,600x1,200) graphic resolution at 60Hz refresh
rate.
It can simply extend over the limits of copper wire extension without
any distribution amplifier or repeater. In addition, the products
could offer a benefit to make electrical separation between graphic
sources and display ends.
M1-100 point-to-point fiber cable implements DDC/HDCP interconnection as well as 4
channel graphic data (Red, Green, Blue, Clock) into fiber-optic technology,
using 8 fibers cable.
M1-1P0 point-to-point hybrid cable is designed to transmit graphic data over fiber,
but interconnect DDC and DC power for the transmitting and receiving
modules over copper wires.
M1-201SA fiber detachable module adopts two duplex LC patch cord fibers to transmit only 4 channels graphic data with self EDID programming feature.
M1-2R2-TR fiber/copper detachable module adopts RJ-45C UTP cable for DDC/HDCP interconnection
as well as two duplex LC patch cord fibers to transmit the graphic
data.
M1-2R2VI-DU fiber/copper detachable module adopts RJ-45C UTP cable for DDC/HDCP interconnection
as well as four duplex LC patch cord fibers to transmit Dual DIV
signal.
Applications Include:
- Digital display systems interconnection for medical, military, aero, factory,
and traffic control
- Digital FPDs, PDPs and projectors in conference room and auditorium
- Kiosk with digital FPDs
- Color LED signboards, FPDs and PDPs for information display and stadiums
|
|